From HFML-FELIX Wiki
| Ethernet device | |
| Location | |
|---|---|
| Room | FX-2.35 |
| IP | |
| DNS name | unknown |
| Network | FLARE LINAC network |
| IP | 192.168.1.1 |
| MAC | 00:c0:f6:63:0b:28 |
The FLARE LINAC network has it's own KTI-2601B managed switch, separate from the CNCZ managed networks.
Notes
[edit | edit source]The default PVID / vLAN for all* ports has been set to 11. All ports are untagged. The management interface also listens on vLAN 11. This was changed because it was impossible to remove vLAN 1 traffic from a port. The exception is port 25, this port has PVID/vLAN 2981. The traffic from 2981 is sent tagged to port 8, where it shares the uplink to incubator with the untagged traffic of the other ports.
Ports
[edit | edit source]| Port# | Links to |
|---|---|
| 1 | linac-control |
| 2 | safety plc |
| 3 | hmi |
| 4 | cisco rv082 + NC + patch FX-1.10 + Pi6 |
| 5 | NC |
| 6 | e-source |
| 7 | PLC15 + PLC16 + PLC18 |
| 8 | patch incubator FX-1.05 |
| 9 | NC |
| 10 | NC |
| 11 | klystron mod |
| 12 | NC |
| 13 | vacuum |
| 14 | NC |
| 15 | magnets |
| 16 | rf |
| 17 | NC |
| 18 | NC |
| 19 | NC |
| 20 | NC |
| 21 | NC |
| 22 | NC |
| 23 | NC |
| 24 | NC |
| 25 | uplink to vlan31 |
| 26 | supermicro |
Resources
[edit | edit source]- Manual
- File:KS-2601-B 2.01.27 20101110.zip (checked 26/05/2014) SW24F2GB
- Web interface [1]
