ETH484-16 is an ETH484 ethernet controlled IO card in use for COFFEE.
Navigation ETH484-15 << ETH484-16 >> ETH484-17 (List all)
I/O
I/O connections
| ETH484-16
|
| Digital
|
| 1 |
Klystron East Heater On
|
| 2 |
Klystron East Heater Ready
|
| 3 |
Klystron West Heater On
|
| 4 |
Klystron West Heater Ready
|
| 5 |
Prebuncher Power status
|
| 6 |
not used
|
| 7 |
not used
|
| 8 |
not used
|
|
| Relay
|
| 1 |
Klystron East heating set
|
| 2 |
Klystron West heating set
|
| 3 |
Prebuncher Power set
|
| 4 |
not used
|
| Analog
|
| 1 |
not used
|
| 2 |
not used
|
| 3 |
not used
|
| 4 |
not used
|
|
Read-only items
| topic |
function |
value
|
| FELIX/ETH484/ETH484-16/relay/1/state |
Klystron East heating set |
OUTPUT_ACTIVE / OUTPUT_INACTIVE
|
| FELIX/ETH484/ETH484-16/relay/2/state |
Klystron West heating set |
OUTPUT_ACTIVE / OUTPUT_INACTIVE
|
| FELIX/ETH484/ETH484-16/relay/3/state |
Prebuncher Power set |
OUTPUT_ACTIVE / OUTPUT_INACTIVE
|
| FELIX/ETH484/ETH484-16/digital/1/state |
Klystron East Heater On |
OUTPUT_ACTIVE / OUTPUT_INACTIVE / INPUT_ACTIVE
|
| FELIX/ETH484/ETH484-16/digital/2/state |
Klystron East Heater Ready |
OUTPUT_ACTIVE / OUTPUT_INACTIVE / INPUT_ACTIVE
|
| FELIX/ETH484/ETH484-16/digital/3/state |
Klystron West Heater On |
OUTPUT_ACTIVE / OUTPUT_INACTIVE / INPUT_ACTIVE
|
| FELIX/ETH484/ETH484-16/digital/4/state |
Klystron West Heater Ready |
OUTPUT_ACTIVE / OUTPUT_INACTIVE / INPUT_ACTIVE
|
| FELIX/ETH484/ETH484-16/digital/5/state |
Prebuncher Power status |
OUTPUT_ACTIVE / OUTPUT_INACTIVE / INPUT_ACTIVE
|
| FELIX/ETH484/ETH484-16/connected |
The state of the TCP connection from the daemon to the ETH484-16 device. |
True / False.
|
| FELIX/ETH484/ETH484-16/voltage |
The ETH484-16 board power supply input voltage |
Float, commonly between 12-13V
|
Writable topics
| topic |
function |
value
|
| FELIX/ETH484/ETH484-16/relay/1/command |
Klystron East heating set |
('on', '1', 'True') / ('off', '0', or 'False')
|
| FELIX/ETH484/ETH484-16/relay/2/command |
Klystron West heating set |
('on', '1', 'True') / ('off', '0', or 'False')
|
| FELIX/ETH484/ETH484-16/relay/3/command |
Prebuncher Power set |
('on', '1', 'True') / ('off', '0', or 'False')
|
- Note: you may append a time duration to pulse the output. See ETH484#Write for specifics and examples
- Note 2: it is probably best to send commands without the retain bit, in order not to confuse others. (Also in case of a service reboot, the values would be applied immediately.)
